Have you noticed small black dots on the siding of your Cincinnati home? If so, you may be experiencing artillery fungus. This type of fungus develops in organic mulch and appears in the spring and fall when temperatures are between fifty and seventy degrees. This kind of fungus can cause many problems if not dealt with quickly. In this short guide, you will be informed of the top four ways to remove artillery fungus with Cincinnati power washing.
1. Remove fungus quickly
Artillery fungus needs to be removed as soon as you notice it because if it is left for any amount of time, it can stain the surface that it has adhered to. It tends to like light, bright surfaces such as light siding, soffits, gutters, windows, downspouts, roofing material, and even cars. The fungus opens up and “shoots” its spores about twenty feet in all directions focusing on the brightest spots. This is why it is called artillery fungus. As soon as you see small black dots on your property, call in a handyman or immediately perform Cincinnati power washing to remove the spores from your property.
2. Cincinnati power washing turbo nozzle
Another useful way to remove the artillery fungal spores is with a turbo nozzle. This needs to be used with extreme caution as power washing is already dangerous with the high pressures and a turbo nozzle, in addition, will deliver a cutting stream of hot water that can gouge or cut surfaces as it is concentrated. It does remove stubborn stains though, such as artillery fungus, from firm surfaces. Use caution around the HVAC system as well as the siding as you do not want to strip off all the exterior painting.
3. Utilize hot water
One of the most critical aspects of removing the fungus with Cincinnati power washing is to use hot water for the removal. The water temperature needs to be approximately 200 degrees Fahrenheit. This method will work if the spores have not been in place for very long, no longer than two weeks generally. When power washing, you need to use a high flow rate as well as a high PSI to blast the spores off your property.
4. More work with wood
Unfortunately, if the fungal spores have shot themselves onto any wooden surface, you are going to have much more work than just power washing them off the exterior of where they adhered. If the spores have attached to wood and after power washing, you still see small black dots, this means the fungus has already “set” itself into the wood. Find some finely graded steel wool and set out for a long afternoon of removing the spores by hand.
As you can see, there are multiple ways to rid yourself and your home of this nasty fungus. By using a turbo nozzle in combination with hot water and pressure washing your home as soon as you see the nuisance, you should be able to eliminate the fungus for good. By following our advice on the top four ways to remove artillery fungus with Cincinnati power washing from your property, your home will once again be shiny and new!
